SAP Community Network Forums » SAP NetWeaver » SAP NetWeaver Administrator

Thread: The Java VM terminated with a non-zero exit code

This question is not answered.


Permlink Replies: 25 - Pages: 2 [ 1 2 | Next ] - Last Post: Nov 5, 2009 4:07 AM Last Post By: ram1001
ram1001

Posts: 72
Registered: 4/22/09
Forum Points: 0
 
The Java VM terminated with a non-zero exit code  
Posted: Nov 2, 2009 10:26 AM
Click to report abuse...   Click to reply to this thread Reply
Hi gurus, I have ECC6.0 dual stack. The J2EE server (Server 0) doesnt start. The error message in the trace was exitcode -11113.

I've attached the std_server0.out file trace below. Please guide me trough how to resolve this issue since i am new into this.


Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Nov 2, 2009 4:45:57 PM com.sap.engine.core.Framework [SAPEngine_System_Threadimpl:5]_76 Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.


-->I've checked the java version,instance profile parameter and everthing seems to be fine. Now the UME service failed. What doest it mean and how to resolve this problem. Thank you in advance for the help.

Sunny Pahuja

Posts: 1,612
Registered: 10/11/08
Forum Points: 2,678
 
Re: The Java VM terminated with a non-zero exit code   Helpful
Posted: Nov 2, 2009 10:36 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
Hi,

What is the UME of your Java ?

Check whether this UME is up or not ?

Also, paste complete std_server0.log and dev_server0..

Thanks
Sunny
ram1001

Posts: 72
Registered: 4/22/09
Forum Points: 0
 
Re: The Java VM terminated with a non-zero exit code  
Posted: Nov 2, 2009 11:05 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
Hi sunny thank you for your reply. I am not sure how to check UME in my server . Can you please guide me step by step how to check UME. I've attached the complete std_server.out below. -------------------------------------------------------------------------------- stdout/stderr redirect -------------------------------------------------------------------------------- node name : server0 pid : 5124 system name : EC4 system nr. : 00 started at : Mon Nov 02 16:39:35 2009 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR timeout occured TIME Mon Nov 02 16:44:22 200 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -5 MODULE gwxx.c LINE 480 DETAIL timeout 60000 msecs SYSTEM CALL NiRead COUNTER 1 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398) at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31) at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214) at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144) at com.sap.engine.frame.core.thread.Task.run(Task.java:64) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:109) Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR timeout occured TIME Mon Nov 02 16:44:22 200 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -5 MODULE gwxx.c LINE 480 DETAIL timeout 60000 msecs SYSTEM CALL NiRead COUNTER 1 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236) at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491) at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.(PrincipalDatabagFactoryInstance.java:446) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63) at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221) at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287) ... 6 more [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. Nov 2, 2009 4:44:22 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_81] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. -------------------------------------------------------------------------------- stdout/stderr redirect -------------------------------------------------------------------------------- node name : server0 pid : 5124 system name : EC4 system nr. : 00 started at : Mon Nov 02 16:44:26 2009 [Thr 5908] MtxInit: 10001 0 0 CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto SAP J2EE Engine Version 7.00 PatchLevel 56839.450 is starting... Loading: LogManager ... 703 ms. Loading: PoolManager ... 0 ms. Loading: ApplicationThreadManager ... 94 ms. Loading: ThreadManager ... 16 ms. Loading: IpVerificationManager ... 15 ms. Loading: ClassLoaderManager ... 16 ms. Loading: ClusterManager ... 203 ms. Loading: LockingManager ... 110 ms. Loading: ConfigurationManager ... 2156 ms. Loading: LicensingManager ... 31 ms. Loading: CacheManager ... 141 ms. Loading: ServiceManager ... 5.500: [GC 5.500: [DefNew: 87552K->6072K(131328K), 0.0422004 secs] 87552K->6072K(1004800K), 0.0423211 secs] Loading services.: Service memory started. (31 ms). Service DQE started. (0 ms). Service userstore started. (0 ms). Service caf~eu~odi~mnuacc started. (0 ms). Service cross started. (16 ms). Service file started. (32 ms). 8.314: [GC 8.314: [DefNew: 93624K->10793K(131328K), 0.0459854 secs] 93624K->10793K(1004800K), 0.0460981 secs] Service timeout started. (187 ms). Service caf~eu~cc~api started. (47 ms). Service jmx_notification started. (63 ms). Service runtimeinfo started. (94 ms). Service trex.service started. (94 ms). Service p4 started. (328 ms). Service classpath_resolver started. (32 ms). 11.030: [GC 11.030: [DefNew: 98323K->16551K(131328K), 0.0619190 secs] 98323K->16551K(1004800K), 0.0620259 secs] 13.418: [GC 13.418: [DefNew: 104103K->16444K(131328K), 0.0450134 secs] 104103K->16444K(1004800K), 0.0451206 secs] 14.978: [GC 14.978: [DefNew: 103996K->17457K(131328K), 0.0466459 secs] 103996K->17457K(1004800K), 0.0467462 secs] 16.900: [GC 16.900: [DefNew: 105009K->20294K(131328K), 0.0566141 secs] 105009K->20294K(1004800K), 0.0567137 secs] 18.440: [GC 18.440: [DefNew: 107846K->20923K(131328K), 0.0546596 secs] 107846K->20923K(1004800K), 0.0547612 secs] 19.714: [GC 19.714: [DefNew: 108475K->23252K(131328K), 0.0611611 secs] 108475K->23252K(1004800K), 0.0612682 secs] Service log_configurator started. (11500 ms). Service locking started. (0 ms). Service http started. (391 ms). Service naming started. (750 ms). Service appclient started. (140 ms). Service failover started. (172 ms). Service javamail started. (250 ms). Service ts started. (187 ms). Service jmsconnector started. (266 ms). Service licensing started. (46 ms). Service connector started. (375 ms). Service webservices started. (765 ms). Service iiop started. (687 ms). 22.099: [GC 22.099: [DefNew: 110804K->25305K(131328K), 0.0782894 secs] 110804K->25305K(1004800K), 0.0783982 secs] 24.167: [GC 24.167: [DefNew: 112857K->29050K(131328K), 0.0795712 secs] 112857K->29050K(1004800K), 0.0796748 secs] 24.889: [GC 24.889: [DefNew: 116602K->22955K(131328K), 0.0464506 secs] 116602K->22955K(1004800K), 0.0465498 secs] Service deploy started. (19157 ms). Service com.sap.portal.runtime.config.kmreadonly started. (16 ms). Service MigrationService started. (47 ms). Service bi~mmr~deployer started. (31 ms). Service configuration started. (47 ms). 28.135: [GC 28.135: [DefNew: 110507K->27546K(131328K), 0.0672966 secs] 110507K->27546K(1004800K), 0.0674056 secs] Service dbpool started. (1641 ms). Service UT started. (0 ms). Service caf~eu~gp~mail~cf started. (47 ms). Nov 2, 2009 4:45:57 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_76] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR timeout occured TIME Mon Nov 02 16:45:57 200 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -5 MODULE gwxx.c LINE 480 DETAIL timeout 60000 msecs SYSTEM CALL NiRead COUNTER 1 ". This message is critical if it appears during the startup of the AS Java. Nov 2, 2009 4:45:57 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_76] Fatal: service com.sap.security.core.ume.service ================= ERROR ================= Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR timeout occured TIME Mon Nov 02 16:45:57 200 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -5 MODULE gwxx.c LINE 480 DETAIL timeout 60000 msecs SYSTEM CALL NiRead COUNTER 1 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398) at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31) at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214) at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144) at com.sap.engine.frame.core.thread.Task.run(Task.java:64) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:109) Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR timeout occured TIME Mon Nov 02 16:45:57 200 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -5 MODULE gwxx.c LINE 480 DETAIL timeout 60000 msecs SYSTEM CALL NiRead COUNTER 1 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236) at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491) at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.(PrincipalDatabagFactoryInstance.java:446) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63) at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221) at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287) ... 6 more com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR timeout occured TIME Mon Nov 02 16:45:57 200 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -5 MODULE gwxx.c LINE 480 DETAIL timeout 60000 msecs SYSTEM CALL NiRead COUNTER 1 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398) at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31) at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214) at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144) at com.sap.engine.frame.core.thread.Task.run(Task.java:64) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:109) Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR timeout occured TIME Mon Nov 02 16:45:57 200 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -5 MODULE gwxx.c LINE 480 DETAIL timeout 60000 msecs SYSTEM CALL NiRead COUNTER 1 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236) at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491) at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.(PrincipalDatabagFactoryInstance.java:446) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63) at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221) at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287) ... 6 more [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. Nov 2, 2009 4:45:57 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_76] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Juan Reyes  Moderator

Posts: 7,618
Registered: 1/16/06
Forum Points: 12,410
 
Re: The Java VM terminated with a non-zero exit code   Helpful
Posted: Nov 2, 2009 11:10 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR timeout occured
Seems like your gateway is not responding... Have yo u tried to give your server a quick boot?....

Regards
Juan
Anil Bhandary

Posts: 532
Registered: 4/8/08
Forum Points: 508
 
Re: The Java VM terminated with a non-zero exit code   Helpful
Posted: Nov 2, 2009 11:13 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
Hi Ram,

Did you check your abap stack , is it in running state or not.
Error seems your abap stack is down.

Thanks
Anil
ram1001

Posts: 72
Registered: 4/22/09
Forum Points: 0
 
Re: The Java VM terminated with a non-zero exit code  
Posted: Nov 2, 2009 11:19 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
Yes i've rebooted the system several time Juan. The ABAP system is working fine. All the work process is in wait status and users can log into server. The dispatcher is in yellow colour because the the Server 0 is not starting up. Other then everything it seems to work fine.

I also have done this step below but still the same problem persist. Please advice on the issue.


1) Run: Configure.bat from \usr\sap\<SID>\JC<nr>\j2ee\configtool
2) Go to cluster-data -> Global server configuration -> services ->
com.sap.security.core.ume.service -> ume.persistence.data_source_configuration
select Restore to default button.
Default value will now be set to dataSourceConfiguration_database_only.xml
3) save and exit. Restart cluster server

Anil Bhandary

Posts: 532
Registered: 4/8/08
Forum Points: 508
 
Re: The Java VM terminated with a non-zero exit code   Helpful
Posted: Nov 2, 2009 11:22 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
Hi Ram,

What is your instance no of abap stack ??

Thanks,
Anil

Edited by: Anil Bhandary on Nov 2, 2009 11:23 AM
ram1001

Posts: 72
Registered: 4/22/09
Forum Points: 0
 
Re: The Java VM terminated with a non-zero exit code  
Posted: Nov 2, 2009 11:25 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
My instance number to abap stack is 00
ram1001

Posts: 72
Registered: 4/22/09
Forum Points: 0
 
Re: The Java VM terminated with a non-zero exit code  
Posted: Nov 3, 2009 8:15 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
Hi Gurus, Any help about this issue. Please guide me through. I'm still stuck at the same stage.
Joe Bo.

Posts: 645
Registered: 8/21/06
Forum Points: 1,030
 
Re: The Java VM terminated with a non-zero exit code   Helpful
Posted: Nov 3, 2009 9:01 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
The message quote by Juan above shows that your gateway isn't running.
If rebooting won't help, check the gateway log file; something like <Drive>:\usr\sap\<SID>\<Instance>\work\dev_rd

Was it working before? And what did you change?
ram1001

Posts: 72
Registered: 4/22/09
Forum Points: 0
 
Re: The Java VM terminated with a non-zero exit code  
Posted: Nov 3, 2009 9:26 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
Hi gurus, As far i know ; I didnt made any changes to the system or gateway. I've attached the *DEV_RD* gateway trace file below. Please look into it and suggest. Thanks. --------------------------------------------------- trc file: "dev_rd", trc level: 1, release: "700" --------------------------------------------------- Tue Nov 03 14:18:39 2009 ***LOG S00=> GwInitReader, gateway started ( 4440) [gwxxrd.c 1758] systemid 562 (PC with Windows NT) relno 7000 patchlevel 0 patchno 221 intno 20050900 make: multithreaded, Unicode, 64 bit, optimized pid 4440 Tue Nov 03 14:18:40 2009 gateway runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC) gateway (version=700.2009.02.03) gw/local_addr : 0.0.0.0 CCMS: AlInitGlobals : alert/use_sema_lock = TRUE. Tue Nov 03 14:18:41 2009 Bind service sapgw00 (socket) to port 3300 GwPrintMyHostAddr: my host addresses are : 1 : [192.168.0.142] BFSAP4 (HOSTNAME) 2 : [127.0.0.1] BFSAP4 (LOCALHOST) Full qualified hostname = BFSAP4 DpSysAdmExtCreate: ABAP is active DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active DpShMCreate: sizeof(wp_adm) 29792 (1752) DpShMCreate: sizeof(tm_adm) 5912704 (29416) DpShMCreate: sizeof(wp_ca_adm) 24064 (80) DpShMCreate: sizeof(appc_ca_adm) 8000 (80) DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080 DpShMCreate: sizeof(comm_adm) 552080 (1088) DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0 DpShMCreate: sizeof(slock_adm) 0 (104) DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0 DpShMCreate: sizeof(file_adm) 0 (72) DpShMCreate: sizeof(vmc_adm) 0 (1864) DpShMCreate: sizeof(wall_adm) (41664/36752/64/192) DpShMCreate: sizeof(gw_adm) 48 DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F2B0050, size: 6614144) DpShMCreate: allocated sys_adm at 000000000F2B0050 DpShMCreate: allocated wp_adm at 000000000F2B2270 DpShMCreate: allocated tm_adm_list at 000000000F2B96D0 DpShMCreate: allocated tm_adm at 000000000F2B9730 DpShMCreate: allocated appc_ca_adm at 000000000F862DB0 DpShMCreate: allocated comm_adm at 000000000F864CF0 DpShMCreate: system runs without slock table DpShMCreate: system runs without file table DpShMCreate: allocated vmc_adm_list at 000000000F8EB980 DpShMCreate: allocated gw_adm at 000000000F8EBA00 DpShMCreate: system runs without vmc_adm DpShMCreate: allocated ca_info at 000000000F8EBA30 MtxInit: -2 0 0 Tue Nov 03 14:25:49 2009 GwDpInit: attached to gw_adm at 000000000F8EBA00 ***LOG Q0I=> NiIRead: recv (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 2 / sock 1612 (SI_ECONN_BROKEN/10053; I4; ST; 192.168.0.142:2296) [nixxi.cpp 4424] ***************************************************************************** * * LOCATION SAP-Gateway on host BFSAP4 / sapgw00 * ERROR connection to partner 'BFSAP4:2296' broken * * TIME Tue Nov 03 14:25:49 2009 * RELEASE 700 * COMPONENT NI (network interface) * VERSION 38 * RC -6 * MODULE nixxi.cpp * LINE 4424 * DETAIL NiIRead * SYSTEM CALL recv * ERRNO 10053 * ERRNO TEXT WSAECONNABORTED: Software caused connection abort * COUNTER 1 * ***************************************************************************** *** ERROR => GwIRegProg: GwRead failed (NIECONN_BROKEN) [gwxxrd.c 15814] ***LOG Q0I=> NiIRead: recv (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 2 / sock 1612 (SI_ECONN_BROKEN/10053; I4; ST; 192.168.0.142:2371) [nixxi.cpp 4424] ***************************************************************************** * * LOCATION SAP-Gateway on host BFSAP4 / sapgw00 * ERROR connection to partner 'BFSAP4:2371' broken * * TIME Tue Nov 03 14:25:49 2009 * RELEASE 700 * COMPONENT NI (network interface) * VERSION 38 * RC -6 * MODULE nixxi.cpp * LINE 4424 * DETAIL NiIRead * SYSTEM CALL recv * ERRNO 10053 * ERRNO TEXT WSAECONNABORTED: Software caused connection abort * COUNTER 2 * ***************************************************************************** *** ERROR => GwIRegProg: GwRead failed (NIECONN_BROKEN) [gwxxrd.c 15814] ***LOG Q0I=> NiIRead: recv (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 2 / sock 1612 (SI_ECONN_BROKEN/10053; I4; ST; 192.168.0.142:2413) [nixxi.cpp 4424] ***************************************************************************** * * LOCATION SAP-Gateway on host BFSAP4 / sapgw00 * ERROR connection to partner 'BFSAP4:2413' broken * * TIME Tue Nov 03 14:25:49 2009 * RELEASE 700 * COMPONENT NI (network interface) * VERSION 38 * RC -6 * MODULE nixxi.cpp * LINE 4424 * DETAIL NiIRead * SYSTEM CALL recv * ERRNO 10053 * ERRNO TEXT WSAECONNABORTED: Software caused connection abort * COUNTER 3 * ***************************************************************************** *** ERROR => GwIRegProg: GwRead failed (NIECONN_BROKEN) [gwxxrd.c 15814] ***LOG Q0I=> NiIRead: recv (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 2 / sock 1612 (SI_ECONN_BROKEN/10053; I4; ST; 192.168.0.142:2431) [nixxi.cpp 4424] ***************************************************************************** * * LOCATION SAP-Gateway on host BFSAP4 / sapgw00 * ERROR connection to partner 'BFSAP4:2431' broken * * TIME Tue Nov 03 14:25:49 2009 * RELEASE 700 * COMPONENT NI (network interface) * VERSION 38 * RC -6 * MODULE nixxi.cpp * LINE 4424 * DETAIL NiIRead * SYSTEM CALL recv * ERRNO 10053 * ERRNO TEXT WSAECONNABORTED: Software caused connection abort * COUNTER 4 * ***************************************************************************** *** ERROR => GwIRegProg: GwRead failed (NIECONN_BROKEN) [gwxxrd.c 15814]
SENTHIL CHINNARAJ

Posts: 70
Registered: 11/14/08
Forum Points: 116
 
Re: The Java VM terminated with a non-zero exit code   Helpful
Posted: Nov 3, 2009 9:30 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
Hi Ram,

Please check the dev_server0 log file. and post the error. Check whether ABAP stack is running or not.

With Regards,
Senthil
ram1001

Posts: 72
Registered: 4/22/09
Forum Points: 0
 
Re: The Java VM terminated with a non-zero exit code  
Posted: Nov 3, 2009 9:36 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
Hi Senthil, As i mention the Abap stack is up and running. It has no problem . I've attached the dev_server0 as per your request. Kindly guide me through. Thank you. --------------------------------------------------- trc file: "E:\usr\sap\EC4\DVEBMGS00\work\dev_server0", trc level: 1, release: "700" --------------------------------------------------- node name : ID5026250 pid : 3908 system name : EC4 system nr. : 00 started at : Tue Nov 03 16:32:20 2009 arguments : arg[00] : E:\usr\sap\EC4\DVEBMGS00\exe\jlaunch.exe arg[01] : pf=E:\usr\sap\EC4\SYS\profile\EC4_DVEBMGS00_BFSAP4 arg[02] : -DSAPINFO=EC4_00_server arg[03] : pf=E:\usr\sap\EC4\SYS\profile\EC4_DVEBMGS00_BFSAP4 arg[04] : -DSAPSTART=1 arg[05] : -DCONNECT_PORT=64999 arg[06] : -DSAPSYSTEM=00 arg[07] : -DSAPSYSTEMNAME=EC4 arg[08] : -DSAPMYNAME=BFSAP4_EC4_00 arg[09] : -DSAPPROFILE=E:\usr\sap\EC4\SYS\profile\EC4_DVEBMGS00_BFSAP4 arg[10] : -DFRFC_FALLBACK=ON arg[11] : -DFRFC_FALLBACK_HOST=localhost [Thr 4544] Tue Nov 03 16:32:20 2009 [Thr 4544] *** WARNING => INFO: Unknown property [instance.box.number=EC4DVEBMGS00bfsap4] [jstartxx.c 841] [Thr 4544] *** WARNING => INFO: Unknown property [instance.en.host=BFSAP4] [jstartxx.c 841] [Thr 4544] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841] [Thr 4544] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841] ********************************************************************** JStartupReadInstanceProperties: read instance properties [E:\usr\sap\EC4\DVEBMGS00\j2ee\cluster\instance.properties] -> ms host : BFSAP4 -> ms port : 3901 -> OS libs : E:\usr\sap\EC4\DVEBMGS00\j2ee\os_libs -> Admin URL : -> run mode : normal -> run action : NONE -> enabled : yes ********************************************************************** ********************************************************************** Used property files -> files [00] : E:\usr\sap\EC4\DVEBMGS00\j2ee\cluster\instance.properties ********************************************************************** ********************************************************************** Instance properties -> ms host : BFSAP4 -> ms port : 3901 -> os libs : E:\usr\sap\EC4\DVEBMGS00\j2ee\os_libs -> admin URL : -> run mode : normal -> run action : NONE -> enabled : yes ********************************************************************** ********************************************************************** Bootstrap nodes -> [00] bootstrap : E:\usr\sap\EC4\DVEBMGS00\j2ee\cluster\instance.properties -> [01] bootstrap_ID5026200 : E:\usr\sap\EC4\DVEBMGS00\j2ee\cluster\instance.properties -> [02] bootstrap_ID5026250 : E:\usr\sap\EC4\DVEBMGS00\j2ee\cluster\instance.properties ********************************************************************** ********************************************************************** Worker nodes -> [00] ID5026200 : E:\usr\sap\EC4\DVEBMGS00\j2ee\cluster\instance.properties -> [01] ID5026250 : E:\usr\sap\EC4\DVEBMGS00\j2ee\cluster\instance.properties ********************************************************************** [Thr 4544] JLaunchRequestQueueInit: create named pipe for ipc [Thr 4544] JLaunchRequestQueueInit: create pipe listener thread [Thr 1196] JLaunchRequestFunc: Thread 1196 started as listener thread for np messages. [Thr 5888] WaitSyncSemThread: Thread 5888 started as semaphore monitor thread. [Thr 4544] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202) [Thr 4544] CPIC (version=700.2009.02.11) [Thr 4544] [Node: server0] java home is set by profile parameter Java Home: C:\j2sdk1.4.2_22-x64 [Thr 4544] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\EC4\DVEBMGS00\exe\jvmx.jar ********************************************************************** JStartupIReadSection: read node properties [ID5026250] -> node name : server0 -> node type : server -> node execute : yes -> jlaunch parameters : -> java path : C:\j2sdk1.4.2_22-x64 -> java parameters : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:+DisableExplicitGC -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -> java vm version : 1.4.2_22-rev-b03 -> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.) -> java vm type : server -> java vm cpu : amd64 -> heap size : 1024M -> init heap size : 1024M -> root path : E:\usr\sap\EC4\DVEBMGS00\j2ee\cluster\server0 -> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;. -> OS libs path : E:\usr\sap\EC4\DVEBMGS00\j2ee\os_libs -> main class : com.sap.engine.boot.Start -> framework class : com.sap.bc.proj.jstartup.JStartupFramework -> registr. class : com.sap.bc.proj.jstartup.JStartupNatives -> framework path : E:\usr\sap\EC4\DVEBMGS00\exe\jstartup.jar;E:\usr\sap\EC4\DVEBMGS00\exe\jvmx.jar -> shutdown class : com.sap.engine.boot.Start -> parameters : -> debuggable : no -> debug mode : no -> debug port : 50021 -> shutdown timeout : 120000 ********************************************************************** [Thr 4544] JLaunchISetDebugMode: set debug mode [no] [Thr 5368] JLaunchIStartFunc: Thread 5368 started as Java VM thread. [Thr 5368] [JHVM_PrepareVMOptions] use java parameters set by profile parameter Java Parameters: -Xss2m ********************************************************************** JHVM_LoadJavaVM: VM Arguments of node [server0] -> stack : 1048576 Bytes -> arg[ 0]: exit -> arg[ 1]: abort -> arg[ 2]: vfprintf -> arg[ 3]: -Djco.jarm=1 -> arg[ 4]: -XX:MaxPermSize=256M -> arg[ 5]: -XX:PermSize=256M -> arg[ 6]: -XX:NewSize=171M -> arg[ 7]: -XX:MaxNewSize=171M -> arg[ 8]: -XX:+DisableExplicitGC -> arg[ 9]: -verbose:gc -> arg[ 10]: -XX:+PrintGCDetails -> arg[ 11]: -XX:+PrintGCTimeStamps -> arg[ 12]: -Djava.awt.headless=true -> arg[ 13]: -Dsun.io.useCanonCaches=false -> arg[ 14]: -XX:SoftRefLRUPolicyMSPerMB=1 -> arg[ 15]: -XX:SurvivorRatio=2 -> arg[ 16]: -XX:TargetSurvivorRatio=90 -> arg[ 17]: -Djava.security.policy=./java.policy -> arg[ 18]: -Djava.security.egd=file:/dev/urandom -> arg[ 19]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -> arg[ 20]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -> arg[ 21]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -> arg[ 22]: -Dsys.global.dir=E:\usr\sap\EC4\SYS\global -> arg[ 23]: -Dapplication.home=E:\usr\sap\EC4\DVEBMGS00\exe -> arg[ 24]: -Djava.class.path=E:\usr\sap\EC4\DVEBMGS00\exe\jstartup.jar;E:\usr\sap\EC4\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;. -> arg[ 25]: -Djava.library.path=C:\j2sdk1.4.2_22-x64\jre\bin\server;C:\j2sdk1.4.2_22-x64\jre\bin;C:\j2sdk1.4.2_22-x64\bin;E:\usr\sap\EC4\DVEBMGS00\j2ee\os_libs;E:\sapdb\programs\bin;E:\sapdb\programs\pgm;C:\j2sdk1.4.2_22-x64\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;E:\usr\sap\EC4\SYS\exe\uc\NTAMD64 -> arg[ 26]: -Dmemory.manager=1024M -> arg[ 27]: -Xmx1024M -> arg[ 28]: -Xms1024M -> arg[ 29]: -DLoadBalanceRestricted=no -> arg[ 30]: -Djstartup.mode=JCONTROL -> arg[ 31]: -Djstartup.ownProcessId=3908 -> arg[ 32]: -Djstartup.ownHardwareId=P0428676588 -> arg[ 33]: -Djstartup.whoami=server -> arg[ 34]: -Djstartup.debuggable=no -> arg[ 35]: -Xss2m -> arg[ 36]: -DSAPINFO=EC4_00_server -> arg[ 37]: -DSAPSTART=1 -> arg[ 38]: -DCONNECT_PORT=64999 -> arg[ 39]: -DSAPSYSTEM=00 -> arg[ 40]: -DSAPSYSTEMNAME=EC4 -> arg[ 41]: -DSAPMYNAME=BFSAP4_EC4_00 -> arg[ 42]: -DSAPPROFILE=E:\usr\sap\EC4\SYS\profile\EC4_DVEBMGS00_BFSAP4 -> arg[ 43]: -DFRFC_FALLBACK=ON -> arg[ 44]: -DFRFC_FALLBACK_HOST=localhost -> arg[ 45]: -DSAPSTARTUP=1 -> arg[ 46]: -DSAPSYSTEM=00 -> arg[ 47]: -DSAPSYSTEMNAME=EC4 -> arg[ 48]: -DSAPMYNAME=BFSAP4_EC4_00 -> arg[ 49]: -DSAPDBHOST=BFSAP4 -> arg[ 50]: -Dj2ee.dbhost=BFSAP4 ********************************************************************** CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto [Thr 5368] JHVM_LoadJavaVM: Java VM created OK. ********************************************************************** JHVM_BuildArgumentList: main method arguments of node [server0] ********************************************************************** [Thr 3300] Tue Nov 03 16:32:21 2009 [Thr 3300] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes [Thr 3300] Tue Nov 03 16:32:22 2009 [Thr 3300] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework [Thr 3300] JLaunchISetClusterId: set cluster id 5026250 [Thr 3300] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)] [Thr 3300] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)] Tue Nov 03 16:32:25 2009 5.692: [GC 5.692: [DefNew: 87552K->6230K(131328K), 0.0450197 secs] 87552K->6230K(1004800K), 0.0451288 secs] Tue Nov 03 16:32:28 2009 8.585: [GC 8.585: [DefNew: 93782K->10792K(131328K), 0.0478338 secs] 93782K->10792K(1004800K), 0.0479434 secs] Tue Nov 03 16:32:31 2009 11.359: [GC 11.359: [DefNew: 98344K->16413K(131328K), 0.0728473 secs] 98344K->16413K(1004800K), 0.0729560 secs] Tue Nov 03 16:32:34 2009 14.053: [GC 14.053: [DefNew: 103965K->15409K(131328K), 0.0520254 secs] 103965K->15409K(1004800K), 0.0521249 secs] Tue Nov 03 16:32:36 2009 15.849: [GC 15.849: [DefNew: 102961K->17296K(131328K), 0.0451099 secs] 102961K->17296K(1004800K), 0.0452122 secs] Tue Nov 03 16:32:37 2009 17.792: [GC 17.792: [DefNew Tue Nov 03 16:32:38 2009 : 104848K->19175K(131328K), 0.0508762 secs] 104848K->19175K(1004800K), 0.0509867 secs] Tue Nov 03 16:32:39 2009 19.206: [GC 19.206: [DefNew: 106727K->22258K(131328K), 0.0610634 secs] 106727K->22258K(1004800K), 0.0611673 secs] Tue Nov 03 16:32:41 2009 21.417: [GC 21.417: [DefNew: 109810K->23513K(131328K), 0.0674115 secs] 109810K->23513K(1004800K), 0.0675213 secs] Tue Nov 03 16:32:43 2009 23.727: [GC 23.727: [DefNew: 111065K->28615K(131328K), 0.0833968 secs] 111065K->28615K(1004800K), 0.0834955 secs] Tue Nov 03 16:32:45 2009 25.771: [GC 25.771: [DefNew Tue Nov 03 16:32:46 2009 : 116167K->29441K(131328K), 0.0839751 secs] 116167K->29441K(1004800K), 0.0840820 secs] 26.436: [GC 26.436: [DefNew: 116993K->23091K(131328K), 0.0470533 secs] 116993K->23091K(1004800K), 0.0471510 secs] Tue Nov 03 16:32:50 2009 30.472: [GC 30.472: [DefNew: 110643K->27658K(131328K), 0.0687799 secs] 110643K->27658K(1004800K), 0.0688830 secs] Tue Nov 03 16:32:53 2009 33.540: [GC 33.541: [DefNew: 115210K->33982K(131328K), 0.0843275 secs] 115210K->33982K(1004800K), 0.0844473 secs] [Thr 2392] Tue Nov 03 16:32:54 2009 [Thr 2392] JLaunchIExitJava: exit hook is called (rc = -11113) [Thr 2392] ********************************************************************** *** ERROR => The Java VM terminated with a non-zero exit code. *** Please see SAP Note 943602 , section 'J2EE Engine exit codes' *** for additional information and trouble shooting. ********************************************************************** [Thr 2392] JLaunchCloseProgram: good bye (exitcode = -11113)
SENTHIL CHINNARAJ

Posts: 70
Registered: 11/14/08
Forum Points: 116
 
Re: The Java VM terminated with a non-zero exit code   Helpful
Posted: Nov 3, 2009 10:14 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
Hi Ram,

Please check your RAM. because there is no enough heap memory to start the java engine. let us know the your system property. may be this will cause the error. last week i had the same issue becuase of the RAM issue.

Regards,
Senthil Kumar.C
ram1001

Posts: 72
Registered: 4/22/09
Forum Points: 0
 
Re: The Java VM terminated with a non-zero exit code  
Posted: Nov 3, 2009 10:30 AM   in response to: ram1001 in response to: ram1001
Click to report abuse...   Click to reply to this thread Reply
Hi Senthi thanks for the reply. I have checked the memory utilization in ST06 and heap memory in ST02. I still have 450MB free memory. In ST02, the heap memory is not highlighted in RED.The total RAM in my computer is 4GB. I also checked in OS level in Task Manager. The free memory is 450MB. So tell me what else i can do to resolve this problem . Is this could be RAM issue. Thanks.

Point your RSS reader here for a feed of the latest messages in all forums